How To Adjust ISO and Shutter Speed Camera Settings in Rock Pilot

ISO and Shutter Speed settings on your ROCK LiDAR unit can be adjusted to meet data capture needs. Changing these settings may improve image quality in low light conditions.

Connect your ROCK LiDAR unit to an aircraft, power on your drone and LiDAR unit. then open the ROCK Pilot app.  To access ISO and Shutter Speed settings, you will want to 1.) tap on the "..." icon in the top right of the screen, 2.) tap on the gear icon (second from the bottom), then 3.) tap on "Photo".  Follow the steps in the video below to apply custom ISO and Shutter Speed settings. Be sure to CONFIRM your settings after changing to apply them.  The video below walks through the steps above-

The default values for ISO and Shutter Speed will be 1600 and 800 respectively.  The maximum recommended ISO value is 3200, and the lowest recommended Shutter Speed is 50.