How to remove and reattach the camera from the R3 Pro V2 or R3 Pro LiDAR unit

The camera can be removed for SLAM or Aerial capture.

Step 1: Push easily on the screws and unscrew the camera with the 2 holding screws.

Step 2: Gently remove the camera after the screws are loosened by pulling it away from the LiDAR slowly.

Step 3: Place the camera back in the case. 

To reattach: Just go in reverse!

Step 1: Check the connection points between the camera and LiDAR unit for any damage or wear.

Step 2: Gently connect the camera to the LiDAR unit and align the two holding screws.  

Step 3: Push easily on the screws and tighten the 2 holding screws.