Setting up Emlid Flow to receive NTRIP corrections ensures accurate survey data. Follow these steps to configure your Emlid Reach receiver properly.
Connect Your Receiver in Emlid Flow
-
Open the Emlid Flow App.
-
Navigate to the Receivers Tab.
-
Refresh the available receivers.
-
Select your specific Reach receiver.
2. Configure Correction Input for NTRIP
-
Locate the Correction Input option.
-
Select NTRIP as the correction input source.
-
Tap the edit icon (pencil symbol) to enter settings.
-
Tap the three dots icon, and Enter the required NTRIP credentials:
-
Address: rtk.rockrobotic.com
-
Port: unique to specific ROCK Base unit being used
-
Username: unique to account
-
Password: unique to account
-
Mount Point: unique to specific ROCK Base unit being used
-
-
Save the settings.
3. Set Up Wi-Fi Connection
-
Go back to the Receivers Page.
-
Tap on Wi-Fi settings.
-
Connect to a hotspot (e.g., your mobile phone or a dedicated hotspot device).
-
Ensure the hotspot is active and configured correctly.
-
If needed, enable the personal hotspot on your phone.
4. Verify Connection and Corrections
-
After setup, navigate back to the Receivers Tab.
-
The status should show Waiting for FIX....
-
Once the connection is established, you should see a Fixed Solution Notification.
Benefits of Proper NTRIP Configuration
-
Improved accuracy with real-time GNSS corrections.
-
Seamless integration with various survey workflows.
-
Reliable data collection for mapping and surveying projects.