Setup
      Back to home
      1. ROCK Knowledgebase
      2. ROCK Ultra
      3. Setup

      How-to Update your ROCK Ultra Firmware

      Updating ROCK Ultra Firmware

      1. Download available firmware update from your ROCK Cloud account.
      2. Make a folder on your USB.
      3. Name it "update" (all lowercase).
      4. Put the zipped firmware file into the "update" folder - DO NOT UNZIP/UNCOMPRESS THE FIRMWARE FILE
      5. Return your USB to your ROCK Ultra.  Turn on the LiDAR unit by pushing the button once.
      6. The firmware update will automatically initiate. It takes about a minute to complete. 
      7. The LiDAR unit will shut off when it's done and the firmware file will have been removed from the USB assuming it was a successful update.
      8. Then start the LiDAR unit again when you are ready for data collection and you're good!


      After the firmware update is complete, be sure your USB drive has the "DATA" folder to ensure the ROCK Ultra will pass the Start Up/GNSS Test.