Skip to content
English
www.rockrobotic.com
  • There are no suggestions because the search field is empty.

How to remove and reattach the camera from the R3 Pro V2 or R3 Pro LiDAR unit

The camera can be removed for SLAM or Aerial capture.

Step 1: Push easily on the screws and unscrew the camera with the 2 holding screws.

Step 2: Gently remove the camera after the screws are loosened by pulling it away from the LiDAR slowly.

Step 3: Place the camera back in the case. 

To reattach: Just go in reverse!

Step 1: Check the connection points between the camera and LiDAR unit for any damage or wear.

Step 2: Gently connect the camera to the LiDAR unit and align the two holding screws.  

Step 3: Push easily on the screws and tighten the 2 holding screws.  

After removing and reattaching the camera from your ROCK LiDAR unit, you will need to complete a camera calibration flight, and the camera calibration process in ROCK Desktop before processing your first LiDAR dataset.  Camera Calibration with ROCK Desktop: A Detailed Guide