Starting Your Mapping Mission on the DJI M400 using the DJI Pilot 2 app

The video below shows how to start a mapping mission on the DJI M400 using the DJI Pilot 2 app, and what to expect on the preflight checklist page.

 Preflight Checklist Warnings

Note: When executing your mission, the Mapping Checklist may display the following warnings in orange. These are expected when using a non-DJI payload and it is safe to proceed:

• Failed to save Payload Settings. Reconfigure before executing flight route
• No payload installed on E-Port 1. Preset payload for flight route is PSDK. Make sure payload is installed correctly or adjust flight route

Select “Upload Flight Mission” then “Start” to begin the mission.