Wifi Not Connecting?

Change your wifi from 2.4Ghz to 5.8Ghz

Likely the issue you are encountering is the control signal from your aircraft is interfering with your LiDAR's WiFi. This is most prevalent on the 2.4Ghz channel and therefore the easiest solution is to change your LiDAR's WiFi to 5.8Ghz and that should alleviate most of your issues.

However if you are still unable to connect to your LiDAR there are still options!

1. Forget your ROCK**** Network and try and reconnect
2. Use the simple 1 button interface to trigger the unit